Rose Electronics CrystalView DVI Quad - Manual (Page 36)

CRYSTALVIEW DVI QUAD INSTALLATION AND OPERATIONS MANUAL 32
Audio Specifications
Description Bi-directional stereo audio
Transmission Method Digitized virtually CD quality audio (16-bit, 38.4KHz)
Signal Levels
Line-Level (5 Volts p-p maximum)
Input Impedance 47K
Microphone Support A microphone may be connected to the Receiver Unit.
Pull-up resistor provides bias for condenser microphone.
Option to set microphone amplification to +17dB.
Serial Specifications
Baud Rate Up to 19,200 Baud
Data Format Format Independent
Flow Control RTS, CTS, DTR, DSR
(Sent across link)
Transmitter Connector DB9 Female (DCE)
Receiver Connector DB9 Male (DTE)
Appendix B – Part Numbers
Part Number Description
CAB-DVIDMMnnn DVI-D mm cable
CAB-DVIIMMnnn DVI-I mm cable
CAB-USBABnnn USB type A/B cable
CAB-DVIAUD005 DVI-D male and PS/2 kb/ms on CPU to DVI-D male
CAB-MD8D9A006 CPU Audio and Serial to mini-Din 8
CAB-SPMMnnn Audio 3.5mm cable
CAB-D9MFnnn RS232 DB9MF serial cable
RM-UM19 19 inch Rackmount Bracket for “M” chassis units
RM-UB19 19 inch Rackmount Bracket for “B” chassis units
RM-UD-1U Under desk Rackmount plate
Appendix C – RackMount Kit
Use the RM-UM19 Rack-mount kit to install the product in a standard 19” server rack