Appendix c. rack mount instructions – Rose Electronics Video Splitter CAT5 User Manual
Page 18
14
VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL
Appendix C. Rack mount instructions
To rack mount your VideoSplitter CAT5, secure the mounting brackets to
the rack using the appropriate size bolts, nuts and lock washers.
The following guidelines should be observed when installing.
a).
Do not exceed the operating temperature of 0
ο
C to 45
ο
C.
b).
Do not block power supply vents or restrict airflow.
c).
Mechanical loading of the rack should be considered to prevent
instability and possible tipping over.
d).
Tighten all connectors securely and provide adequate strain relief for
all cables.
e).
Provide a grounded power source to all Units. Pay special attention
to overall branch circuit load ratings before connecting equipment to
this source. Overloaded circuits are potential fire hazards and can
cause equipment failures or poor performance.