Rose Electronics Video Splitter CAT5 - Manual (Page 5)

INTRODUCTION
VIDEOSPLITTER CAT5 INSTALLATION AND OPERATIONS MANUAL
1
Disclaimer
While every precaution has been taken in the preparation of this manual,
the manufacturer assumes no responsibility for errors or omissions.
Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer
reserves the right to change the specifications, functions, or circuitry of the
product without notice.
The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.
System introduction
Thank you for choosing the Rose Electronics

VideoSplitter CAT5
.
The VideoSplitter CAT5 is the result of Rose Electronics commitment to
providing state-of-the-art solutions for today’s demanding workplace.
The VideoSplitter CAT5 has proven to be a valuable investment for any
business, big or small, that has a need to distribute a video source to
multiple locations. The VideoSplitter CAT5 is available in a 6 port and
12 port model with serial and audio options. The serial and audio models
distribute the video and audio signals to multiple sites. Serial support is
supported on each individual module. Contact Rose Electronics support if
serial distribution to the remote stations is needed..
The VideoSplitter CAT5 system consists of the 6 or 12 port VideoSplitter
CAT5 Unit and the Remote Units. The VideoSplitter CAT5 unit connects
to your computers video port using a DB25M to HD15M Rose UltraCable.
Serial and audio models also connect to the audio in/out ports and the
serial DB9 port on a computer. The VideoSplitter CAT5 unit and Remote
Units are connected together with industry standard CAT5 shielded or
unshielded, solid core twisted-pair cable terminated with RJ45 connectors.
CAT5 cable can be ordered from Rose Electronics in 25-1,000 foot
lengths.
Using the VideoSplitter CAT5 unit to distribute your video and optional
audio has several applications that make it convenient for the users. You
can locate up to 12 monitors 1,000 foot away from your computer.