Rugged Cams Fusion DVR - Manual (Page 5)

4CH User Guide
Notice for installation
Notice for installation Notice for installation
All of below notices should be verified before installation and operation.
☞ Do not install DVR in moist, dusty or dirty locations.
☞ Do not expose the system to intense heat or direct sunlight
☞ This system should not be located close to magnetic materials or vibrating
equipment.
☞ Do not install the system in environments with extreme temperatures. (Operating
Temperature 5 °C ~ 40 °C)
☞ Place the system away from debris that may fall into the ventilation slots of the
system.
☞ Ensure the power switch is in the OFF position prior to installation.
☞ Place the system in a location with enough space for cable connections.
☞ Install and operate the system in a well-ventilated place without vibration.
☞ System may be susceptible to interference if placed to close radio or television units.
☞ Do not disassemble system.
☞ Power Overload : Please be sure to connect the system to a power supply within the
indicated range.
☞ If a system is connected to the power directly, please ensure i t is grounded properly
5