TA Triumph-Adler FAX 925 - Manual (Page 46)

English
Chapter 3 - Dial Directories 38
5. After you have completed your selection (by pressing the Start
key), the display again shows SELECT LOC.(S) YES (STR/LOC.)
EXIT (X). Continue to add or delete locations from your group.
Each group can contain up to a maximum of all of the One Touch
and Auto Dial locations available on your fax machine.
6. When you are finished programming your group, press the NO X
key. The display shows LOCATION PROGRAMMING ENTER
(SRCH, OT, A/D, #).
7. To program another group, go back to Step 2. If you are finished,
press the Select Function key.
Note: After programming a group, you can check the locations
programmed into the group by carrying out Steps 1 - 3. At Step
4, repeatedly press the Start key to view all the programmed
locations. To delete a location, press the NO
X key.
Note: The locations programmed into groups can be printed. See
Telephone Directory in Reports later in this user’s guide.
Delete an Auto Dial location
Press Auto Dial. Enter a 3 digit Auto Dial number. Press
Start to delete it from the group.
Search for a location by
name to add or delete
Press the Search key repeatedly until the location you want
appears.Press Start to add it to the group. Press Start to delete
it from the group.
To do this Use