TA Triumph-Adler FAX 925 - Manual (Page 94)

English
Chapter 6 - Programming 86
off. See Connecting to a PBX in the Installation chapter for instructions
on changing this setting.
FLASH/NORMAL: If your fax machine is connected to a PBX, this
function tells your fax machine about the type of PBX line your fax
machine is connected to. Available settings are normal (N) and flash (F).
AUTO START: When this function is turned on, your fax machine
automatically begins dialling as soon as you have selected a location by
pressing a One Touch key or entering an Auto Dial code. You do not have
to press the Start key. Available settings are on and off.
DIAL PREFIX: If your fax machine is connected to a PBX, use this
function to tell your fax machine what access number is used to obtain an
outside line from your PBX. You can enter up to 4 digits. See Connecting
to a PBX in Installation for instructions on changing this setting.
Changing dial parameter settings
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Using the numeric keypad, press number 2. The display shows
2:DIAL PARAMETER.
4. Press the W YES key until the display shows the dial parameter you
want to change.
5. Repeatedly press the NO X key until the setting you want appears
in the display.
6. Press the W YES key to confirm your selection. The name of the
next dial parameter setting will appear in the display.
7. Press the Select Function key to finish.