Kyocera Command Center RX - Manual (Page 79)

Network Settings
User Guide 75
Password: This protocol is activated when EAP-TTLS, EAP-FAST, or
PEAP(EAP-MS-CHAPv2) has been selected for encryption. Enter the password.
Common Name: This protocol is activated when EAP-TTLS, EAP-FAST, or
PEAP(EAP-MS-CHAPv2) has been selected for encryption. Specifies the com-
mon name of the server certificate if the server is required to be authenticated.
Match Rule of Common Name: This protocol is activated when EAP-TTLS, EAP-
FAST, or PEAP(EAP-MS-CHAPv2) has been selected for encryption. When the
server certificate is verified, the common name specified under Common Name is
compared with the common name on the server certificate. This item allows you to
specify whether the common names are considered to be matched if they exactly
or partially match.
Expiration Verification: When this option is enabled, the expiration of the server
certificate is verified at communicating. If the certificate is expired, communication
will fail. When it is disabled, the expiration will not be verified.
IEEE802.1X Client Certificate: The current status is shown in IEEE802.1X Client
Certificate. To make advanced settings, click Settings button and select a device
certificate. Click Submit button to finalize settings. Configure the device certificate
on the Certificates page under Security Settings.
Certificate Status
Root Certificate 1 (to 5), IEEE802.1X Client Certificate: The content of the certif-
icate is shown. Make settings for the Root Certificate on the Certificates page
under Security Settings.
9. LLTD: LLTD is a protocol that provides network topology discovery and quality of
service diagnostics. To enable the LLTD protocol, turn this item On.
Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the avail-
able network for LLTD protocol.
10.REST: REST is an architecture for the web application suitable for the multiple
software linkage in the distributed network system. To enables the REST protocol,
turn this item On.
Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the avail-
able network for REST protocol.
11.REST over SSL: A certificate can be added for communication using the REST
protocol. To enable the REST over SSL, turn this item On. To enable this protocol,
select On on SSL of the Network Security Settings page.
Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the avail-
able network for REST over SSL.
eSCL over SSL Certificate: The status of eSCL over SSL Certificate is shown.
To make advanced settings, click Settings button and select a certificate. Click
Submit button to finalize settings.
Configure the device certificate on the Certificates page of Security Settings.
This Certificate can be used in common with ThinPrint, HTTPS/IPP over SSL,
Enhanced WSD over SSL, eSCL over SSL, and so on.
3.
Click Submit button.
Wireless LAN
This section includes advanced settings for the Wi-Fi and Wi-Fi Direct.
* If the settings for the item marked with an asterisk (*) has been changed, you must
restart the machine or the network. To restart the machine, proceed to the Reset page.
Wi-Fi Settings
1.
Click Wireless LAN under Network Settings on the navigation menu. The Wireless
LAN Settings page opens.