S-camshaft replacement – SAF-HOLLAND XL-TA10006OM Drum Brake Axles Tapered and Parallel Spindle Axles User Manual
Page 25
25
XL-TA10006OM-en-US Rev B · 2014-03-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
S-camshaft Replacement
Figure 46
Figure 47
5. Install the cam seal washer and retaining ring onto
S-Camshaft and slide S-Camshaft into the S-Camshaft
bearing housing bracket (Figure 46).
6. Install the brake shoes and brake adjusters as described
in Section 12 and 14, respectively.
7. Inspect S-Camshaft installation to ensure that the correct
S-Camshaft has been installed on the required side of the
axle for proper operation (Figure 47).
S-CAM BEARING
HOUSING BRACKET
S-CAMSHAFT
WASHER
CAM SEAL
RETAINING RING
BRAKE SPIDER
CORRECT S-CAMSHAFT INSTALLED
INCORRECT S-CAMSHAFT INSTALLED
S-CAM ROTATION
S-CAM ROTATION
WHEEL ROTATION
WHEEL ROTATION
GUIDE PLATE, BRAKE ROLLER SHOE