SAF-HOLLAND XL-TA10006OM Drum Brake Axles Tapered and Parallel Spindle Axles - Manual (Page 29)

29 XL-TA10006OM-en-US Rev B · 2014-03-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Torque and Lubrication
21. Torque and Lubrication Specifications
TORQUE SPECIFICATIONS
COMPONENT TORQUE VALUE
Grease Fitting, Spider 20-50 in-lbs (2-6 N•m)
Axle, Inner Nut Refer to Section 7
Axle, Outer Nut 300-400 ft.-lbs. (406-542 N•m)
Air Chamber Nuts 80-125 ft.-lbs. (108-169 N•m)
Hubcap Bolts 12-16 ft.-lbs. (16-21 N•m)
Self-Threading Screw 15-22 ft.-lbs. (20-30 N•m)
LUBRICATION SPECIFICATION
COMPONENT SURFACE TO BE LUBRICATED TORQUE VALUE
S-Camshafts
S-Camshaft Bearings (Four
(4) Grease Fittings per Axle) Lithium Complex
Grease
S-Camshafts S-Camshaft Spline NeverSeez
Brakes Brake Shoe Rollers anchor Pins NeverSeez
Brakes − Brake
Adjuster
Brake Adjuster
Grease Fitting Lithium Complex
Grease
Axle Bearings and Hubs
80/90 Gear Oil or
Lithium Complex
Grease*
* Oil lubed bearings and hubs should remain lubricated with oil, grease lubed
bearings and hubs should remain lubricated with grease.
NOTE: Intervals are based upon normal operations. Reduce intervals to
compensate for abnormal operations or severe conditions. During
inactive periods, sufficient lubrication must be performed for
equipment preservation.