SAF-HOLLAND XL-TA10006OM Drum Brake Axles Tapered and Parallel Spindle Axles - Manual (Page 28)

28 XL-TA10006OM-en-US Rev B · 2014-03-13 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Routine Service Schedule
20. Routine Service Schedule
WHICHEVER OCCURS FIRST PERIODIC CHECKS
MILEAGE INTERVALS
AFTER FIRST
3,000 MILES EVERY 10,000
MILES
EVERY 50,000
MILES
EVERY 100,000
MILES
TIME INTERVALS
AFTER FIRST
MONTH EVERY MONTH EVERY 6 MONTHS EVERY 12 MONTHS
VISUAL INSPECTION FOR WEAR/DAMAGE
Check brake linings for wear. • •
Check S-Camshaft for proper operation. • •
Check brake adjusters for correct function. • •
Check air brake system for leaks (brake applied). • •
Check axle structural components for cracks or damage. • •
Check hub lubrication level for excessive leakage. • •
MECHANICAL CHECK
Attention: Torque check wheel nuts after the first thirty
(30) miles (50 km) and 100 miles (150 km) (repeat also
after every wheel removal).
•
Torque check all nuts and bolts to recommended setting. • •
Check and adjust wheel bearing end play. • •
Pack hub bearings with fresh lubricant (also after every
brake lining replacement, check hub bearing wear).
•
Lubricate S-Camshaft bearing bushings. • •
SAFETY INSPECTION
Check brake lining to drum clearance for correct
adjustment – re-adjust clearance if necessary. Check
service brake and parking brake for performance.
• •
SPECIAL SERVICE CONDITIONS
Vehicles with long standing periods.
Service at specified time intervals, e.g. trailer used for storage or frequently left standing for
several days at a time.
Vehicles used under extreme conditions.
Service at suitably reduced intervals, e.g. trailer operating in continuous multi-shifts or in
off-road construction sites.
Warranty claims will only be accepted as long as the operation and maintenance instructions have been complied with and if SAF-HOLLAND approved spare parts have been fitted.