Amprobe AT-4000 Advanced-Wire-Tracer - Manual (Page 23)

21
Current Output of the Signal:
Low Mode: 11 mA average, 30 mA peak
Medium Mode: 12 mA average, 36 mA peak
High Mode: 13 mA average, 63 mA peak
Fuse: Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM
Signal Output (9V supply):
High setting: 0.74 VAC
Medium setting: 0.61 VAC
Low setting: 0.53 VAC
Battery: 9V alkaline- 24V jack will accept battery pack accessory
(B2024 or B2025)
A2202 Clamp-on Transmitter Accessory
Operating Frequency: 32.768KHZ as supplied by T-4000
Case Breakdown Voltage: 3000 volts
Maximum Wire size: 2000 MCM or 2” dia. Cable
Battery: None, power is supplied by T-4000
B2024 Battery Pack
Type: Nickel-Cadmium rechargeable (20 AA cells)
Capacity: 24-Volt, 600 mah
Rechargeable Time: 14 hours
Fuse: internal self-resetting
B2025 Recharger/Converter
Input: 115VAC
Output: 24 VDC @350 mah