Amprobe AT-4000 Advanced-Wire-Tracer - Manual (Page 8)

B2024 Battery Pack
24 Volt Nickel-Cadmium rechargeable cell custom designed for light weight, small size,
and durability. Used to boost the output of the T-4000. Consult the specs for the boost
levels. Includes a self-resetable fuse. Be sure to charge fully before use.
(DO not use the B2024 when tracing energized lines.)
Note: When using the battery booster (B2024 or B2025) the unit will work in ultra
high “U-HI” mode only. Remove the battery booster to return to normal operation.
Fig.4 B2024 Battery Pack
B2025 110V Converter/Recharger
Can be used to either recharge the B2024 or directly boost the T-4000. To recharge the
battery, leave it connected for at least 8 hours. (DO not use the B2024 when tracing
energized lines.)
Note: When using the battery booster (B2024 or B2025) the unit will work in ultra
high “U-HI” mode only. Remove the battery booster to return to normal operation.
Fig.5 B2025 110V Converter/Recharger
6