EnGenius Technologies DuraFon 4X User Manual
Page 15
27
Making a Telephone Call
1. Press
TALK
, wait for dial tone, and then enter phone number.
2. Alternatively, you can enter phone number first then press
TALK key.
When using this method, you can use the
CLEAR
(Left) and
DELETE
(Right) soft keys to edit the number entered. “Delete”
erases the last digit entered. “Clear” erases the entire line but
remains in the dialing mode.
3. Speed dial by access the entries in the phone book
a.
Press
¿orÀ scrolling key to enter the phone book
b. Press TALK to dial the number.
4. To abort dialing, press END key.
Main menu
Sub-menu
1.KeyGuard
2.PhoneBook
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
4.Key Tone
1.Dial Prefix
2.Group Select
3.Forwarding
4.Clear
5.Naming
6.Contrast
7.Backlight
8.Line Select
9.PBX Options
0.Language
6.Registration
7.Text Message
5.Settings
4.Sound
3.Call Logs
8.Unused
1.Auto Attndnt
2.System
9.Admin
Not Applicable
28
Notes:
1.
After a link established, the Base ID will appear on the upper-
right corner. If no Base ID show up, it applied that you are
approaching the boundary of the coverage.
2.
If the line is occupied, the LCD shows “No Line Available”
and handset returns to standby mode.
3.
If a link cannot be established, the LCD will show “No Base”
after a 12-second time out.
4.
A call duration timer will start displaying the length of the call
after link is established.
Making a 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private,
Intercom/ 2-way radio calls independent of the base station.
Intercom/ 2-way communication can be placed from handset to
handset.
Handset to Handset Calls
1. Press Intercom key followed by a two-digit handset ID or
Group ID.
2. Press END key to end the call.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows “No
Connection” after a 12-second time out.
Making a Broadcast
1. Broadcasting
all
handsets
a.
Press
BROADCAST
key from one handset
b. Hear bi-bi-beep while the initiating handset broadcast all
handsets within communication coverage
c. Start to speak the message to be broadcasted once you
hear the “beep” sound; the speakerphone of destination
handsets will be opened up
d.
Release
BROADCAST
key to end the broadcasting