EnGenius Technologies DuraFon 4X - Manual (Page 26)

49
• Press “3” to view the complete number if the
phone number is longer than 14 digits.
b. Press “2” to view the last 10 phone numbers received,
starting from the most recent one. Use ¿or À to scroll
through the list.
i. Press OPTION (Right) soft key for options.
• Press “1” and confirm to erase current record.
• Press “2” to view the arrival date and time of the
call.
• Press “3” to edit and save or save without editing
into the phonebook.
c. Press “3” to view the last 10 phone numbers received but
didn’t answer, starting from the most recent one. Use ¿or
À to scroll through the list.
i. Press OPTION (Right) soft key for options.
• Press “1” and confirm to erase current record.
• Press “2” to view the arrival date and time of the
call.
• Press “3” to edit and save or save without editing
into the phonebook.
d. The two-digit index on the upper right corner of the LCD
display shows the location in ascending order, with 01
being the most recent call.
e. While viewing any of the three call logs, press DIAL (Left)
soft key to dial the phone number.
Notes:
1. Only phone numbers are stored in the three call logs.
Intercom calls are not recorded.
2. Caller ID service is required from your local phone company in
order to receive phone numbers, names and time stamps on
incoming calls. The Received and Missed Call Logs will
register no incoming calls if Caller ID service is not available.
5. Press “4” to set sound-related settings:
a. Press “1” to select ringer volume: Use ¿or À to scroll
through 5 options: Low, Vibrate, Off, High-then-Vibrate,
and High. Press
SAVE (Left) soft key to save selection.
Default = High.
b. Press “2” to select ringer tone: Use ¿or À to scroll through
4 options: 0, 1, 2, and 3. Press SAVE (Left) soft key to
save selection. Default = 0.
c. Press “3” to select key volume when a key is pressed: Use
¿or À to