EnGenius Technologies DuraFon 4X - Manual (Page 7)

11
Handset Illustration
Antenna
Receiver
Battery pack
4-line LCD
Travel charger
jack Headset jack
(2.5mm)
12
Handset Features
Basic Handset Features
1. 4-line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for
backlighting.
b. The 1 st line of LCD consists of icons.
c. Icons explanation from left to right
(1) RSSI (Receive Signal Strength
Indicator)
During a call, the number of bars is
proportional to the radio signal
strength received.
(2) Call in-progress (ON/OFF-Hook)
Indicates if phone line mode is
active
(3) Intercom in-progress
Indicates if Intercom mode is active
(4) Handset ID
Displays a handset icon and a 2-digit Handset ID
(5) Two-Digit Address Index
Shows address index when viewing contents of the call logs.
(6) Line Indicator
Indicates the number of the line being accessed by the
handset.
(7) Battery Strength
z Number of bars is proportional to the amount of battery
time remaining.
z Indicates charging when in charger cradle.
d. The 2 nd and 3 rd lines of the LCD, maximum 14 characters
each, display status, message, menu selections, or user-
editable alphanumerical characters.
e The last line displays the left and right soft keys.
2. Ringer
a. Rings to an incoming call.
b. Distinctive alert sounds indicating various events:
(1) Single Beep: successful key entry
(2) Double beep: failed operation or invalid key entry, also
indicates power on/off
(3) Periodic 1-Long-2-Short Beep (every 1 minute): low battery
warning