Hint – PLANET VIP-156PE User Manual
Page 13
Please locate your PC in the same network segment
(192.168.0.x) of ATA. If you’re not familiar with TCP/IP,
please refer to related chapter on user’s manual CD or
consult your network administrator for proper network
configurations.
Í
Note
20B
LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the address bar.
After logging on machine with username/password (default: root / no password), browse to “Network”
--> “Network Settings” configuration menu:
) of VIP in the address bar.
After logging on machine with username/password (default: root / no password), browse to “Network”
--> “Network Settings” configuration menu:
Parameter Description
IP address
LAN IP address of
ATA
Default
: 192.168.0.1
Subnet Mask
LAN mask of
ATA
Default
: 255.255.255.0
Default Gateway
Gateway of
ATA
Default
: 192.168.0.254
Network settings via Keypad commands
The ATA series phone adapters support telephone keypad configurations, please connect analog
telephone set and refer to the following table for machine network configurations.
When you want to run the setup or the start function, it
L
Hint
must unlock the protect function #190# before set up network
settings and ATA function via keypad..
13