Case 6: call forward feature_example 4, Case 7: auto answer feature_ip to pstn – PLANET VIP-156PE User Manual
Page 58
58B
Case 6: Call Forward Feature_Example 4
In this example, there are three VIP-156 and connect with Peer to Peer mode. VIP-156_A had set Call
Forward function to VIP-156_B.
Machine configuration on the VIP-156:
Please log in VIP-156_A via web browser, browse to the Phone Settings menu and select
the Call service config menu. In the setting page, please enable the All Forward function
and fill in the Forward Type and Forward Number of VIP-156_B, and then the sample
configuration screen is shown below:
Test the scenario:
1. VIP-156_C pick up the telephone
2. Dial the IP Address 192.168.0.1(VIP-156_A)
3. Because VIP-156_A had set up All Forward function to the IP Address 192.168.0.2
(VIP-156_B)
4. The IP Address 192.168.0.2 (VIP-156_B) will ring up then it pick up the telephone and
communication with the VIP-156_C
59B
Case 7: Auto Answer Feature_IP to PSTN
In this example, there are one VIP-157 and two VIP-156 and connect with Peer to Peer mode. The
VIP-157_A had set Auto Answer function for forwarding calls to arbitrary telephone. If there have
incoming IP calls and VIP-157_A doesn’t answer the incoming calls after specific time, the caller will
hear prompt sounds to input the password then dial out an arbitrary PSTN telephone.
58