PLANET VIP-193 - Manual (Page 44)

Connection to a Default Hotspot
Before you begin, make sure you have saved your User Name and Password for the default hotspot you want to use.
These login settings can be configured through the Hotspot screen.
1. Scroll through the choices, and press the center selection key (in the middle of the navigation pad) to select
the wireless hotspot you want to use.
If the hotspot you want is not shown, select Rescan for a new scan.
2. You will be notified when the Wi-Fi Phone has connected to the hotspot, and a checkmark will appear next
to the name of the hotspot.
3. A new window will appear. On the Select Hotspot screen, scroll through the choices, and press the center
selection key to select the appropriate hotspot.
(If the hotspot you want is not listed on the Select Hotspot screen, proceed to step 3 of the following section,
“Connection to a New Hotspot.”)
4. The Wi-Fi Phone will automatically use your User Name and Password to log in.
After you have logged in, select Exit to return to the Wireless screen.
Figure 4-27: Select
Default Hotspot
39
Chapter 4: Configuring the Wi-Fi Phone