PLANET VIP-193 - Manual (Page 75)

6. Wait 10 seconds. Power on the Wi-Fi Phone by pressing and holding down the Power button for
two seconds.
7. Reboot one of your networked computers, and check for an active Internet connection.
• Set up port forwarding on your router. You must specify that four port ranges be forwarded to the IP
address of the Wi-Fi Phone. These four port ranges are as follows: 5060-5061 (UDP), 53-53 (UDP),
69-69 (UDP), and 10000-20000 (UDP).
Note: By default, the Wi-Fi Phone uses a dynamic IP address assigned by your router. For port forwarding,
you may need to assign a static IP address to the Wi-Fi Phone. Contact your Internet phone service provider
for assistance.
If you have a non- router, refer to its documentation for instructions. If you have a router, then follow
these instructions:
1. On one of your networked computers, open your web browser.
2. Access the Router’s Web-based Utility by going to http://192.168.1.1 or the IP address of the
Router.
3. A login screen will appear. Leave the User Name field blank. Enter the Router’s password (the
default is admin) in the Password field. Then click the OK button.
4. Click the Applications & Gaming tab, and then click the Port Range Forwarding tab.
5. For each port range you must specify, enter a different name in the Application field. Then enter the
number or range of external port(s) used by the Wi-Fi Phone.
6. Select the protocol you will be using, UDP.
7. Enter the IP address of the Wi-Fi Phone. For example, if the Wi-Fi Phone’s IP address is 192.168.1.100,
you would enter 100 in the field provided.
70
Appendix A: Common Problem and Solutions