PLANET VIP-193 - Manual (Page 62)

Password. This is the password used in conjunction with the User Name for the Registration Server to
authenticate the Wi-Fi Phone. To add or change the Password, select Edit. Enter the new Password in the new
window. Press the center selection key to save the new setting, or select Exit to return to the previous screen.
Payload Type. G.711a, G.729, and G.711u are the three Payload Types available. They are listed in order of
preference. To change the order of preference, select Edit until the appropriate order of preference is displayed
on-screen.
Packet Time. You have two Packet Time lengths available, Small and Large. To change the time period, select
Edit until the appropriate Packet Time is displayed on-screen.
DTMF Relay. You can enable or disable the DTMF Relay feature. To enable or disable the feature, select Edit. UDP
Port. To add or change the UDP Port number, select Edit. Enter the new UDP Port number in the new window.
Press the center selection key to save the new setting, or select Exit to return to the previous screen. RTP Port.
To add or change the RTP Port number, select Edit. Enter the new RTP Port number in the new window. Press the
center selection key to save the new setting, or select Exit to return to the previous screen. Session Timer. The
periodic refresh of SIP sessions through a re-INVITE or UPDATE request.
SIP Format. The default format should be set to Normal. The other 2 choices may be used with certain SIP
Proxy Servers.
To change how the cursor works, select Option. If your cursor uses the Click feature, the Drag & Drop feature will be
available. If your cursor uses the Drag & Drop feature, the Click feature will be available. Press the left soft key to
select the new cursor feature, or select Return to return to the website.
Select Exit to return to the Web Site screen.
Figure 4-81: Change
Outbound Proxy IP
Figure 4-82: Outbound
Proxy Port
57
Chapter 4: Configuring the Wi-Fi Phone