PLANET VIP-360PT - Manual (Page 22)

Get DNS server automatically
Select it to use DHCP mode to get DNS address, if you don’t select it, you will use static DNS server.
The default is selecting it.
If you use static mode, you need set it.
IP Address Input the IP address distributed to you.
Netmask Input the Netmask distributed to you.
Gateway Input the Gateway address distributed to you.
DNS Domain Set DNS domain postfix. When the domain which you input can not be
parsed, phone will automatically add this domain to the end of the
domain which you input before and parse it again.
Primary DNS Input your primary DNS server address.
Alter DNS Input your standby DNS server address.
If you uses PPPoE mode， you need to make the above setting.
PPPoE Server It will be provided by ISP.
Username Input your ADSL account.
Password Input your ADSL password.
Notice:
1）Click “Apply＂ button after finished your setting, IP Phone will save the setting automatically and
new setting will take effect.
2）If you modify the IP address, the web will not response by the old IP address. Your need input new IP
address in the address column to logon in the phone.
3）If networks ID which is DHCP server distributed is same as network ID which is used by LAN of
system, system will use the DHCP IP to set WAN, and modify LAN＇s networks ID(for example, system
will change LAN IP from 192.168.10.1 to 192.168.11.1) when system uses DHCP client to get IP in
startup; If system uses DHCP client to get IP in running status and network ID is also same as LAN’s,
system will refuse to accept the IP to configure WAN. So WAN’s active IP will be 0.0.0.0