PLANET VIP-360PT - Manual (Page 23)

LAN Config
LAN Config
LAN IP Specify LAN static IP.
Netmask Specify LAN Netmask.
DHCP Service Select the DHCP server of LAN port or not. After you modify the LAN IP
address, phone will amend and adjust the DHCP Lease Table and save the
result amended automatically according to the IP address and Netmask. You
need restart the phone and the DHCP server setting will take effect.
NAT Select NAT or not.
Bridge Mode Select Bridge Mode or not: If you select Bridge Mode, the phone will no longer
set IP address for LAN physical port，LAN and WAN will join in the same
network. Click “Apply”, the phone will reboot.
Notice: If you choose the bridge mode, the LAN configuration will be disabled.