Phone, Dsp config – PLANET VIP-360PT User Manual
Page 42
Phone
DSP Config
In this page, you can configure voice codec, input/output volume and so on.
DSP Configuration
Field name
explanation
First Codec
The fist preferential DSP codec: G.711A/u, G.722, G.723, G.729
Second Codec
The second preferential DSP codec: G.711A/u, G.722, G.723, G.729
Third Codec
The third preferential DSP codec: G.711A/u, G.722, G.723, G.729
Forth Codec
The forth preferential DSP codec: G.711A/u, G.722, G.723, G.729
Fifth Codec
The fifth preferential DSP codec: G.711A/u, G.722, G.723, G.729
Input Volume
Specify Input (MIC) Volume grade.；
Hands-free Volume
Specify Hands-free Volume grade
G729 Payload Length
Set G729 Payload Length
Handdown Time
Specify the least reflection time of Handdown, the default is 200ms.
Ring Type
Select Ring Type
Output Volume
Specify Output (receiver) Volume grade.
Ring Volume
Specify Ring Volume grade
G722 Timestamps
160/20ms or 320/20ms is available
G723 Bit Rate
5.3kb/s or 6.3kb/s is available
Default Ring Type
Set up the ring by default
Signal Standard
Select Signal Standard.
VAD
Select it or not to enable or disable VAD. If enable VAD, G729 Payload length
could not be set over 20ms.