PLANET VIP-360PT - Manual (Page 33)

SIP Config
Field name explanation
Register Status Shows if the phone has been registered the SIP server or not; or so, show
Unapplied;
Server Name Set the server name.
Server Address Input your SIP server address.
Server Port Set your SIP server port.
Account Name Input your SIP register account name.
Password Input your SIP register password.
Phone Number Input the phone number assigned by your VoIP service provider. Phone will
not register if there is no phone number configured.
Display Name Set the display name.
Proxy Server Address Set proxy server IP address（Usually, Register SIP Server configuration is
the same as Proxy SIP Server. But if your VoIP service provider give
different configurations between Register SIP Server and Proxy SIP
Server, you need make different settings.）
Proxy Server Port Set your Proxy SIP server port.
Proxy Username Input your Proxy SIP server account.
Proxy Password Input your Proxy SIP server password.
Domain Realm Set the sip domain if needed, otherwise this VoIP phone will use the
Register server address as sip domain automatically. (Usually it is same
with registered server and proxy server IP address).
Enable Register Start to register or not by selecting it or not.
Register Expire Time Set expire time of SIP server register, default is 60 seconds. If the register
time of the server requested is longer or shorter than the expire time set,
the phone will change automatically the time into the time recommended by
the server, and register again.
NAT Keep Alive Interval Set examining interval of the server, default is 60 seconds
User Agent Set the user agent if have, the default is VoIP Phone 1.0
Signal Key Set the key for signal encryption
Media Key Set the key for RTP encryption
Local port Set sip port of each line
Ring type Set ring type of each line
Hot line Number Set hot line number of each line
Conference Number Configure conference number in server conference.