Yamaha ISX-18 - Manual (Page 15)

11
Preparations
Turning on the power
Plug the power cable into the wall outlet
and press
A
(power)/CONNECT.
• The unit turns on.
• Press
A
(power)/CONNECT again to turn off (standby
mode).
The unit can be set to display the clock or the network connection status when it is in standby (network
standby).
If network standby is turned off, the unit can reduce power consumption without displaying the clock
(eco standby). For details, see the table on the right.
Network standby can be turned on /off in the following procedure.
1
While pressing ALARM of the unit, plug the power cable into an outlet.
2
Press and hold ALARM.
• The front panel display shows “ON” or “OFF.”
A (power)/CONNECT
Network standby Status in network standby/eco standby
• When you turn on the unit for the first time after
purchase, the Wi-Fi indicator blinks and the unit
automatically starts to search iOS device ( P.14).
• When the unit is turned on, a Source indicator
( P.7) lights up.
Network
standby
Eco
standby
Enable/disable the alarm Yes No
Control from the app Yes No
Clock display Yes No
Network connection Yes No
Bluetooth connection Yes No
• When the auto standby is on (default setting), the
unit will automatically go into the standby state
under the following conditions.
- When the unit produces no sound of audio
input and is not operated for about 20 minutes
at selecting Bluetooth or NET as the source.
- When the unit has passed for 8 hours in the FM/
DAB reception.