FujiFilm X-T2 User Manual
Page 289
267
P
eripherals and Optional A
c
c
essories
10
External Flash Units
SYNC TERMINAL
The following options are
available when a fl ash unit is
connected via the sync termi-
nal.
MODE
SYNC TERMINAL
ADJUST
END
Setting
Setting
Description
Description
A
Flash
control
mode
Choose from the following options:
•
M: A trigger signal is transmitted from the sync terminal
and hot shoe when a picture is taken. Choose a shutter
speed slower than the sync speed; even slower speeds
may be required if the unit uses long fl ashes or has a
slow response time.
•
D (OFF): The sync terminal and hot shoe do not
transmit a trigger signal.
B
Sync
Choose whether the fl ash is timed to fi re immediately
after the shutter opens (
H/1ST CURTAIN) or immediately
before it closes (
I/2ND CURTAIN). 1ST CURTAIN is recom-
mended in most circumstances.