Sharp MX-6070N - Manual (Page 28)

28
Copying Problems
COLORS ARE OFF
Check Solution
Did you perform "Registration
Adjustment"? ■ Ask your administrator to perform "Registration Adjustment".
⇒ "Settings (administrator)" → [System Settings] → [Image Quality Adjustment]
→ [Collective Adjustment] → [Registration Adjustment] .
If the color tones are off, perform [Auto Color Calibration (for Copy)] after
finishing registration adjustment. (If the colors are still off after calibration,
repeating calibration may improve the results.)
⇒ "Settings (administrator)" → [System Settings] → [Image Quality Adjustment]
→ [Common Functions] → [Auto Color Calibration (for Copy)]
PART OF THE IMAGE IS CUT OFF
Check Solution
Has an appropriate ratio been
selected for the original size and
paper size? ■ Select an appropriate ratio setting.
Are you using an AB (inch) size
original? ■ When copying an AB (inch) size original, specify the original size manually.
COPIES COME OUT BLANK
Check Solution
Is the original placed face up or face
down correctly? ■ When using the document glass, the original must be placed face down. When
using the automatic document feeder, the original must be placed face up.
I WANT TO COPY MULTIPLE A4 PAGES ONTO
ONE A4 SHEET OF PAPER
Check Solution
Use N-Up. ■ N-Up lets you reduce and copy the images of up to eight A4 pages on one sheet.
Tap the [N-Up] key.
In normal mode, you can also add borders to N-Up copies.
?
!
?
!
?
!
?
!