Enterasys Networks XSR-3150 - Manual (Page 65)

LAN-PPP Services Sample Configuration
XSR Getting Started Guide 3-21
XSR(config-controller<T1-1/0>)#no shutdown
+ Enables T1 controller
XSR(config)#interface serial 1/0:0
+ Configures Serial interface 1, port 1 using channel group 0 and acquires Interface mode
XSR(config-if<S1/0:0>)#encapsulation ppp
+ Enables PPP encapsulation
XSR(config-if<S1/0:0>)#ppp authentication chap
+ Configures CHAP authentication on the interface
XSR(config-if<S1/0:0>)#ip address 154.68.1.47 255.255.255.0
+ Enables IP address for serial interface 1/0
XSR(config-if<S1/0:0>)#backup interface dialer 5
+ Sets dialed interface as a dialed backup
XSR(config-if<S1/0:0>)#no shutdown
+ Enables the interface
XSR(config)#router rip
+ Enables RIP routing and goes to Router mode
XSR(config-router)#network 192.168.1.100
+ Configures a network RIP will advertise its routes to
XSR(config-router)#network 154.68.1.0
+ Configures a second network RIP will advertise its routes to
XSR(config-router)#network 164.55.7.0
+ Configures a third network RIP will advertise its routes to
XSR(config)#interface dialer 5
+ Adds backup interface and acquires Interface mode
XSR(config-if<D5>)#diaer pool 3
+ Adds a dialer pool on interface
XSR(config-if<D5>)#dialer string 18005555555
+ Sets backup phone #
XSR(config-if<D5>)#encapsulation ppp
+ Enables PPP encapsulation on port
XSR(config-if<D5>)#ppp authentication chap
+ Sets CHAP on port
XSR(config-if<D5>)#ip address 164.55.7.22 255.255.255.0
+ Enables the IP address for dialer interface 5
XSR(config-if<D5>)#no shutdown
+ Enables the interface
XSR(config)#interface serial 2/0
+ Configures backup interface: Serial card in slot 2, port 0 and acquires Interface mode
XSR(config-if<S2/0>)#dialer pool-member 3
+ Adds a dial pool
XSR(config-if<S2/0>)#physical-layer sync
+ Sets synchronous mode
XSR(config-if<S2/0>)#no shutdown
+ Enables the interface