Enterasys Networks XSR-3150 - Manual (Page 85)

Bootrom Monitor Mode Commands
XSR Getting Started Guide 3-41
......
si
This command displays XSR 3000 Series inventory with this sample output:
XSR-3150: si
Hardware:
Motherboard Information:
XSR-3150 ID: 9002914-04 REV0A CPLD Rev 3
Serial Number: 2914024201123206
Processor: Broadcom BCM1250 Rev 2 at 600MHz
PowerSupply1, PowerSupply2
Fans 1 2 3 4 5 7 8 10
CPU Temperature Max: 80C Current: 35C
Router Temperature Max: 60C Current: 23C
RAM: 512MB without interleave
Memory Bus at 120MHz, CASL at 2.0
Bootrom Flash: 4MB
Filesystem Flash: 8MB
CompactFlash not present
Real Time Clock
I/O on Motherboard:
GigabitEthernet 1 2 3
Encryption Hardware: not present
Slot 0 card 1: Empty
Slot 0 card 2: Empty
System up for 9 days, 3 hours, 4 minutes 10 seconds.
sn
This command shows network values with the following sample output:
XSR-3150: sn
Local IP address : 192.168.1.12
Gateway IP address : 192.168.1.1
Remote IP address : 192.168.1.2
Remote file path : c:/XSR3000
Transfer Protocol : FTP
Local target name : XSR1
Autoboot : enabled
Quick boot : no
Current GigabitEthernet 0 MAC address is: 00:01:f4:2b:3e:1b
Current GigabitEthernet 1 MAC address is: 00:01:f4:2b:3e:1c
Current GigabitEthernet 1 MAC address is: 00:01:f4:2b:3e:1d