Apply qos -24, Apply qos – Enterasys Networks XSR-3150 User Manual
Page 68
Frame Relay WAN Link with PPP Backup Sample Configuration
3-24 Software Configuration
XSR(config)#interface serial 1/0.2 multipoint
+
Configures FR port: Serial card in slot 1, port 0, sub-interface 2 for multipoint links and acquires Interface mode
XSR(config-if<S1/0.2>)#frame-relay class CLASS_SI
+
Adds another FR map class
XSR(config-if<S1/0.2>)#frame-relay interface-dlci 16
+
Adds PVC #16 and acquires DLCI 16 sub-mode
XSR(config-if<S1/0.2-16>)#class CLASS_DLCI
+
Assigns the specified map class to DLCI 16
XSR(config-if<S1/0.2-16>)#ip address 154.68.2.1 255.255.255.0
+
Configures the IP address of DLCI 16
XSR(config-if<S1/0.2-16>)#no shutdown
+
Enables DLCI 16 interface
Apply QoS
XSR(config)#map-class frame-relay CLASS-FRP
+
Adds a FR map class and acquires FR Map Class mode
XSR(config-map-class<CLASS-FRP>)#frame-relay cir out 48000
+
Sets this map class’ CIR rate at 48000 bits per second
XSR(config-map-class<CLASS-FRP>)#frame-relay bc out 4000
+
Sets this map class’ committed burst size to 4000 bits
XSR(config-map-class<CLASS-FRP>)#frame-relay be out 3000
+
Sets this map class’ excess burst size to 3000 bits
XSR(config-map-class<CLASS-FRP>)#frame-relay adaptive-shaping
+
Enables BECN (traffic shaping) for this map class
XSR(config-map-class<CLASS-FRP>)#service-policy output data_policy
+
Attaches this policy to the map class
XSR(config)#map-class frame-relay CLASS-SI
+
Adds another FR map class and acquires Frame Relay Map Class mode
XSR(config-map-class<CLASS-SI>)#frame-relay cir out 30000
+
Sets this map class’ CIR rate at 30,000 bits per second
XSR(config-map-class<CLASS-SI>)#frame-relay bc out 5000
+
Sets this map class’ committed burst size to 5000 bits
XSR(config-map-class<CLASS-SI>)#frame-relay be out 3000
+
Sets this map class’ excess burst size to 3000 bits
XSR(config-map-class<CLASS-SI>)#frame-relay adaptive-shaping
+
Enables BECN (traffic shaping) for this map class
Router(config-map-class<CLASS-SI>)#service-policy HighOutput
+
Attaches this policy to the map class
XSR(config)#map-class frame-relay CLASS-DLCI
+
Adds another Frame Relay map class and acquires Frame Relay Map Class mode
XSR(config-map-class<CLASS-DLCI>)#frame-relay cir out 50000
+
Sets this map class’ CIR rate at 50,000 bits per second
XSR(config-map-class<CLASS-DLCI>)#frame-relay bc out 4000
+
Sets this map class’ committed burst size to 4000 bits
XSR(config-map-class<CLASS-DLCI>)#frame-relay be out 1000
+
Sets this map class’ excess burst size to 1000 bits
XSR(config-map-class<CLASS-DLCI>)#frame-relay adaptive-shaping
+
Enables BECN (traffic shaping) for this map class
XSR(config-map-class<CLASS-DLCI>)#service-policy output priority-policy
+
Attaches this policy to the map class