Endura RADISYS KP915GV - Manual (Page 20)

KP915GV Product Manual
20
6. Close the load plate, and slightly push down the tongue side.
7. Lower the lever and lock it to the load plate, then the CPU is locked in place
.
CAUTION
Excessive temperatures will severely damage the CPU and system. Therefore, you should install
CPU cooling fan and make sure that the cooling fan works normally at all times in order to prevent
overheating and damaging to the CPU. Please refer to your CPU fan user guide to install it
properly.
1.5.2 Installation of Memory
This motherboard includes four 240-pin slots with 1.8V for DDR2. You must install at least one
memory bank to ensure normal operation.
Installation of DDR2 Memory
1. There is only one gap in the middle of the DIMM slot, and the memory module can be fixed in
one direction only. Unlock a DIMM slot by pressing the module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically into the DIMM slot.
Slightly push down
the tongue side