Endura RADISYS KP915GV - Manual (Page 4)

KP915GV Product Manual
4
Safety and Approval Notices
Safety and approval notices
Item Description
Battery This product contains a lithium cell.
•
When removing or replacing the lithium cell, do not use a
conductive instrument as a short-circuit may cause the cell
to explode. Always replace the cell with one of the same
type. This product uses a CR2032 cell. Dispose of a spent
cell promptly – do not recharge, disassemble or incinerate.
Keep cells away from children.
•
CAUTION! Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of batteries
according to the manufacturer's instructions.
LAN (Local Area
Network) Connector
This product may include an RJ45 LAN connector (see
product options). Do not connect to anything other than an
Ethernet LAN.
Thermal Interface
Material
This product may contain thermal interface material between
devices and heatsinks. This can cause irritation and can stain
clothing. Avoid prolonged or repeated contact with the skin
and wash thoroughly with soap and water after handling. Avoid
contact with eyes and inhalation of fumes. Do not ingest.
Anti-static
Precautions
This product contains static-sensitive components and should
be handled with care. It is recommended that the product be
handled in a Special Handling Area (SHA) as defined in
EN100015-1:1992. Such an area has working surfaces, floor
coverings and chairs connected to a common earth reference
point. An earthed wrist strap should be worn whilst handling.
Other examples of static-sensitive devices are the memory
modules and the processor. Failure to employ adequate anti-
static measures can cause irreparable damage to components
on the motherboard.
Electromagnetic
Compatibility
This product is designed to meet the following EMC standards
when installed in a suitable chassis.
•
FCC Class B (Title 47 of Code of Federal Regulations,
parts 2 & 15, subpart B)
• EN55022 Class B
• EN55024
Safety
This product complies with the American Safety Standard
UL60950 when installed in a suitable chassis.
Legal Directives
This product complies with the relevant clauses of the
following European Directives.
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC