Rear panel, Rear panel 17, Part names and functions – Roland V-1200HD Multi-Format Video Switcher User Manual
Page 17
17
Part Names and Functions
Rear Panel
Number Name
Description
Page
5
TALLY/GPIO connector
Connect devices provided with a tally-light feature and devices equipped with control-signal input/output functions
here.
6
SDI IN connectors
These are connectors for inputting SDI signals. Use them with source devices equipped with SDI output connectors,
such as 3G-SDI, HD-SDI, and SD-SDI devices.
7
SDI OUT connectors
These are connectors for outputting SDI signals. Use them with video devices equipped with SDI input connectors.
8
HDMI IN 1, 2 connectors
These are connectors for inputting HDMI signals. Use them with video cameras and other source devices equipped
with HDMI output connectors. Input video formats that are compatible with the specified processing formats.
* Copyright-protected (HDCP) video cannot be input.
9
HDMI OUT MULTI-VIEW 1
connector
Here you connect an HDMI monitor for multi-view display of the input/output list.
Video selected from among the following is displayed on up to a 16-way split screen. (*1)
5
SDI IN 1–10
5
HDMI IN 1, 2
5
EXP IN 1, 2 (input video from an optional expansion interface)
5
SDI OUT1–6
5
STIILL1, 2 (still images imported from a USB flash drive)
5
EXP OUT 1, 2 (output video sent to optional expansion interfaces)
* Connect a monitor that supports 1080/60p HDMI input.
10
Power Cord Hook
You can use this power cord hook to prevent the power cord from being accidentally disconnected.
11
USB port
This is a USB connector for future feature expansion.
* This port is not active in the initial release of the V-1200HD.
—
12
LAN port
Use this port to connect an optional V-1200HDR dedicated controller, or a computer on which the V-1200HD RCS
remote-control software is installed.
13
Audio selector switch
This switches the input/output mode of the AUDIO IN and AUDIO OUT connectors.
14
AUDIO OUT connectors
These are connectors for outputting audio signals. Connect them to recording equipment, amplifiers, powered
speakers, and other devices that receive audio.
15
AUDIO IN connectors
These are connectors for inputting audio signals. Use them with CD players and other audio source devices.
16
REFERENCE IN connector
OUT/THRU connector
These are connectors for input and output of sync signals.
17
HDMI OUT MULTI-VIEW 2
connector
Here you can connect a monitor to display input/output lists and menu screens.
The selected video is displayed on a four-way split screen. (*1)
* Connect a monitor that supports copyright protection (HDCP).
* Connect a monitor that supports 1080/60p HDMI input.
5
6
12
7
8
9
13
14
15
16
17
18
19
20
21
22
23
24
25
11
26
10