Roland V-1200HD Multi-Format Video Switcher - Manual (Page 26)

26
Setup Menu
Using the Menus
Menu operations follow the procedure described below.
1.
Connect a monitor to the HDMI OUT MULTI-VIEW 2
connector.
The setup menu appears on the monitor connected to HDMI OUT
MULTI-VIEW 2.
2.
Display the menu.
Press the [MENU] button to display the menu.
3.
Select the target menu.
Use the [DEC] and [INC] buttons to select the desired menu item,
then press the [ENTER] button.
The items belonging to the selected menu are displayed.
* For information on where to look for explanations of the items
and to find out about operation procedures, refer to “Menu
Organization” below.
4.
Exit the menu.
When the item operations end, press the [MENU] button several
times to quit the menu.
You can display menus on a multi-view monitor connected to the V-1200HD and use them to make various settings.
Menu Organization
The V-1200HD’s menus are organized as shown below.
Menu item Description Section to see
System Displays the program version information. “Checking the Version Information” (p. 30)
Backup
This saves a settings file on a USB flash drive or deletes a settings
file saved on a USB flash drive.
“Saving a New Settings File (Save As)” (p. 30)
“Saving Settings by Overwriting” (p. 30)
“Deleting Settings” (p. 30)
Restore Loads a settings file saved on a USB flash drive. “Recalling Settings” (p. 30)
Format Formats a USB flash drive. “Formatting a USB Flash Drive” (p. 30)
Factory Reset Returns the unit’s settings to their factory defaults.
“Returning Settings to the Factory-Default
State (Factory Reset)” (p. 30)