Roland V-1200HD Multi-Format Video Switcher - Manual (Page 25)

25
Connecting External Equipment
Connecting Video Output Equipment
Making HDMI Connections
Connect television monitors and other equipment provided with
HDMI input to the respective HDMI OUT connectors.
MULTI-VIEW 1
Video selected from among the following is displayed on up
to a 16-way split screen. (*1)
5 SDI IN 1–10
5 HDMI IN 1, 2
5 EXP IN 1, 2 (input video from an optional expansion
interface)
5 SDI OUT1–6
5 STILL1, 2 (still images imported from a USB flash drive)
* Connect a monitor that supports 1080/60p HDMI input.
MULTI-VIEW 2
Here you connect a monitor for displaying input/output lists
and menu screens.
The selected video is displayed on a four-way split screen. (*1)
* Connect an HDCP-compatible monitor.
* Connect a monitor that supports 1080/60p HDMI input.
HDMI OUT 1, 2
These output video from the V-1200HD’s 4:4:4 process. The
output video is output in the specified 4:4:4 processing
format.
For information on 4:4:4 formats, refer to “4:4:4 Process” (p. 20).
(*1 )For details about the multi-view screen, refer to the “V-1200HDR/V-1200HD RCS
Remote Control Guide” (PDF) available for download from the Roland website.
http://proav.roland.com
Making SDI Connections
Connect monitors, video decks (for recording), and other devices
equipped with SDI inputs to the SDI OUT connectors. Video is
output in the specified 4:2:2 processing format.
For information on 4:2:2 formats, refer to “4:2:2 Process” (p. 19).
Connecting Audio Output Equipment
Making an Analog Connection
Connect the analog inputs of amplifiers, powered speakers, and
recording equipment to the AUDIO OUT connectors.
Set the audio selector switch to [ANALOG].
* The nominal output level of the V-1200HD is +4 dBu. Connect
equipment that accommodates this nominal output level.
NOTE
The audio selector switch affects both input and output. For
details, refer to “About the Audio Selector Switch” (p. 22).
Making a Digital Connection
Connect audio output equipment that has digital (AES/EBU) input
to the AUDIO OUT connectors.
* Use an AES/EBU-compliant cable.
The V-1200HD supports the AES3 standard (24 bits, 48 kHz, two
channels).
Set the audio selector switch to [AES/EBU].
NOTE
The audio selector switch affects both input and output. For
details, refer to “About the Audio Selector Switch” (p. 22).
Connecting Output Equipment