Roland V-1200HD Multi-Format Video Switcher - Manual (Page 23)

23
Connecting External Equipment
Making SDI Connections
Connect video cameras, video decks, and other SDI devices to SDI
IN connectors 1 through 10.
Memo
5 Input video in formats that are compatible with the specified
process formats. For details, refer to “About Processing
Formats” (p. 19).
5 SDI IN 7–10 each support embedded 16 channels of audio
input.
Making HDMI Connections
Connect video cameras, computers, and other devices equipped
with HDMI outputs to the HDMI IN connectors.
HDMI IN 1 , 2
5 Input video in formats that are compatible with the
specified process formats.
For details, refer to “About Processing Formats” (p. 19).
5 Copyright-protected (HDCP) video cannot be input.
HDMI IN 3, 4
5 Using the built-in scalers, you can input a large number of
video formats.
For information on the formats you can input, refer to
“About HDMI IN 3 and 4” (p. 20).
5 These support HDCP signal input.
NOTE
Settings must be made on the V-1200HD when inputting
copyright-protected (HDCP) video. For details, refer to “About
Copyright Protection (HDCP)” (p. 20).
Memo
When connecting a device equipped with a DVI output, use a
DVI-to-HDMI conversion cable and make the connection to an
HDMI IN connector.
Connecting Source Equipment
Connect your external devices to the respective input connectors for video and audio.
Connecting Video Source Equipment
Connect video source devices to the SDI IN and HDMI IN connectors.
Memo
The formats that can be input to the respective connectors vary according to the specified processing format. For details, refer to “About
Processing Formats” (p. 19).