Roland V-1200HD Multi-Format Video Switcher - Manual (Page 18)

18
Part Names and Functions
Number Name Description Page
18 HDMI OUT 1, 2
connectors
These HDMI connectors output the video mixed on the V-1200HD. Use them with displays and other devices equipped
with HDMI input connectors.
Video from the 4:4:4 processing section is output. p. 25
19
HDMI IN 3, 4 connectors
These are connectors for inputting HDMI signals. Use them with computers and other source devices equipped with
HDMI output connectors. Using the V-1200HD’s built-in scalers, you can input a large number of video formats.
These support HDCP signal input. (*2) p. 23
20
RS-232 connector
This is for connecting a remote-control device (such as an RS-232-compatible computer) for operating the V-1200HD
remotely.
p. 28
21
RS-422 connector This connector allows you to connect to a VISCA-compatible camera and operate it remotely from the V-1200HD. p. 29
22 [POWER] (main power)
switch
This turns the main power on and off. After the main power is turned on here, use the power button on the front panel
to turn the V-1200HD on and off for everyday operation.
p. 12
23
AC IN connector This is for connecting the included power cord. p. 10
24
DC IN connector This is for connecting an external power supply. p. 12
25
Ground terminal This terminal is used to connect the V-1200HD to an electrical ground. p. 22
26
Expansion slots A, B These are slots for installing optionally available Xi-series expansion interfaces. p. 14
(*1) For details about the multi-view screen, refer to the “V-1200HDR/V-1200HD RCS Remote Control Guide” (PDF) available for download from the
Roland website.
(*2) Settings must be made on the V-1200HD when inputting copyright-protected (HDCP) video. For details, refer to “About Copyright Protection
(HDCP)” (p. 20).