Roland Aerophone AE-20 Digital Wind Instrument - Manual (Page 3)

01
Introduction
Checking the Accessories
Owner’s Manual
(this document)
Leaflet “USING THE UNIT SAFELY”
AC adaptor
(*1)
Connect the adaptor to the DC-IN jack
on the AE-20. Using the AC adaptor lets
you play for long periods of time without
worrying about running out of battery
power.
USB cable
(USB Type-C®–Type A)
Use this cable to connect the AE-20 with
your computer for exchanging MIDI
messages and audio data.
Mouthpiece cap
Protects the mouthpiece. When you’re
not playing, leave the mouthpiece cap
attached. Press it on until you hear it click
into place.
* Line up the protrusion on the reed with the
protrusion on the cap.
* When removing or attaching the mouthpiece
cap, take care not to touch the reed.
Band
Prevents saliva from reaching the unit
during performance, and entering
the interior from around the buttons,
switches, or performance keys.
Neck strap
Attach the neck strap to the strap ring to
hang the instrument around your neck
when playing.
Thumb hook cover
(2 types)
Attach the included thumb hook cover
onto the thumb hook. Two types of
covers are included, so you can use the
one you like.
The thumb hook cover serves as a
cushion to help relieve the weight of the
instrument on your right thumb, and
serves as an adjuster for finely adjusting
the position of your thumb.
Water basin
(*1)
This cover receives water droplets that
come out of the water drain. This prevents
the water droplets from falling to the
floor. After use, remove the cover and
discard the water that has accumulated.
* Fit the rounded protrusion of the water
basin into the depression at the lower part of
AE-20.
Dedicated handheld carry bag
This is a carry bag made specially for
the AE-20.
*1 The AC adaptor and water basin are
boxed separately and packaged with this
instrument.
3