Roland V-1HD+ Compact 4 x HDMI Video Switcher - Manual (Page 8)

8
Basic Operations
Switching the Video
You can switch between the videos of the A/PGM bus and B/PST bus to specify the final output.
Setting the Operation Mode
There are two operation modes for switching the
video: the “PGM/PST mode” and the “A/B mode.”
Video on the A/PGM bus
Video on the B/PST bus
A/B mode
(factory settings)
When you operate the video fader, the video of the
bus toward which you slide the video fader becomes
the final output.
The video of the other bus becomes the preset video
(the video that is output next).
When the [CUT] or [AUTO] button is operated, the
video on the A/PGM bus and the video on the B/PST
bus become the final output in alternation.
PGM/PST mode (p. 9)
The video on the A/PGM bus is always the final output.
The video on the B/PST bus is preset video (the video
to be output next).
Operating the video fader or the [CUT] or [AUTO]
button makes the final video output and the preset
video change places.
1.
Press the [MENU] button 0 “SYSTEM” 0 select
“PANEL OPERATION,” and press the [VALUE]
knob.
2.
Turn the [VALUE] knob to select “A/B” or “PGM/
PST,” then press the [VALUE] knob.
3.
Press the [MENU] button several times to close
the menu.
Switching in the A/B Mode
1.
Slide the video fader all the way to the top or
bottom.
The video of the bus toward which
you slide the video fader becomes
the final output.
2.
To select the preset video (the video that is
output next), press a cross-point [1]–[4] button
that is on the opposite side as the direction in
which you slid the video fader.
Lit red: Final output video
Lit Green: Preset video (the video to be output next)
3.
Press the [TRANSITION] button to select the
transition effect (MIX, WIPE).
4.
Slide the video fader in the direction opposite
to the direction in step 1.
The transition indicator for the
video that is the final output
is lit.
The video is switched according to the
movement of the video fader.