Part names and functions, Top panel – Roland V-4EX Four Channel Digital Video Mixer with Effects User Manual

Page 11

Advertising
background image

11

Top Panel

fig.top-panel.eps

1
2

3

4

5
6
7

8

9

10

11

12
13

14

15

16

17
18

1 Monitor

This displays video from source equipment or the video output from the V-4EX. You can select a view mode from below by pressing
the MONITOR buttons.

OUTPUT

This displays the current video output from the V-4EX on a single screen.

INPUT

This displays video input from source equipment on a four-way split screen.

INPUT + OUTPUT

This displays the current video output as an inset screen on a four-way split screen displaying the input from source equipment.

You can also use the touch panel to switch the video.

Note the following points when you switch video using the touch panel.

Move the video fader all the way to the end of its stroke. The bus of one end is the target for switching. The touch panel cannot be used for
switching if the fader has not been moved all the way to one end.

The touch panel cannot be used for switching while the menu screen is displayed. Exit the menu when you switch using the touch panel.

2 HDCP Indicator

This operates as described below, depending on the HDCP setting (p. 24).

Lighted

It lights up when an HDCP-compatible device is connected as the output device.

Flashing

It flashes when no output device is connected or when the connected device is not compatible with HDCP.

Unlighted

It goes dark when the V-4EX’s HDCP-signal input/output mode is off.

3 INPUT Buttons

Pressing one of these displays the input/output setting screen for video or audio.

VIDEO

This determines the assignments to channels 1 through 4. For each channel, you can select the enabled input connector.

AUDIO

This displays the mixing settings for audio. With the V-4EX, you can output video and audio together (embedded audio) from
the HDMI connector and USB port. Use this to perform balance/volume adjustment (p. 36) and set the amount of delay for
audio (p. 37).

4 MENU Button and VALUE Dial

Use these to display the menu screen and make various settings for the V-4EX (p. 40).

Part Names and Functions

Advertising