Top panel/front panel, 7panel descriptions – Roland XS-1HD Multi-Format Matrix Switcher User Manual
Page 7
7
Panel Descriptions
Top Panel/Front Panel
[MEMORY] button
This button turns the memory function on/off. If this
is on, up to 16 sets of the video/audio settings and the
state of the operation panel can be saved and recalled.
5
Save (lit red);
Long-press the button
5
Recall (lit green):
Press the button
* When the memory function is on, the cross-point
buttons operate as memory select buttons 1–16.
HDCP indicator
This indicator is lit, blinking, or unlit according to the
HDCP (copy protection) setting and according to
whether an HDCP-compliant device is connected.
SETUP area
[MENU] button
Turning this button on (lit) makes a menu (OSD)
appear on the monitor that is connected to the
VIDEO OUTPUT 4 connector.
If you’ve moved to a lower-level item of the menu,
this button returns you to the next higher level.
[ENTER] button
This button moves to a lower-level menu, or
executes an operation.
[CURSOR] knob
This knob selects a menu category or item.
[VALUE] knob
This knob changes the value of a menu item.
Video fader
When the screen mode is “switcher mode,” this
makes the preset video (the video to output next)
the final output.
Cooling vent
Heat from inside the XS-1HD is
vented here to keep the unit from
overheating.
NOTE
Do not block the cooling vent. If the cooling vent is
blocked, the interior of the XS-1HD might overheat,
causing it to malfunction.
SCREEN MODE indicators
These indicators show the current screen mode.
QUICK EDIT area
[VIDEO], [AUDIO] buttons
These buttons turn on/off the quick edit function
for video or audio. When the function is on, you
can use the operation panel to adjust the video
or audio.
[C1], [C2], [C3] knobs
These knobs adjust the value of the corresponding
menu item.
* If the quick edit function is on, use the cross-point
buttons to select the operation that these knobs
will perform.
[AUTO] button
When the screen mode is “switcher mode,” this button
automatically switches between the final output video
and the preset video (the video to output next).