Roland AIRA Compact E-4 Voice Tweaker User Manual
Page 24
Using the Looper
24
Using the Looper in Sync with External Device Clocks
Recording audio input
1.
Press the [
в
/
у
] (play/record) button.
The unit enters record standby mode, and “
rEC
” blinks in the display.
Recording starts when the next clock is inputted.
During recording or overdubbing, “
rEC
” is displayed and the [
в
/
у
] (play/record) button lights up red.
2.
To finish the recording, press the [
в
/
у
] (play/record) button again.
“
PLAY
” blinks in the display and the unit enters record stop mode.
Recording stops when the next clock is inputted, and playback automatically begins.
During playback, “
PLAY
” is displayed, and the [
в
/
у
] (play/record) button lights up green.
* If a device is connected to the SYNC IN jack, press the [
в
/
у
] (play/record) button to begin recording.
* If a device is connected to the MIDI jacks or to the USB port (for USB MIDI), the unit begins synchronization when a MIDI start
message (FA) is received.