Quick start – Samson Carbon 49 USB/MIDI Keyboard Controller User Manual
Page 11
11
Carbon 49 · USB/MIDI Keyboard Controller
EN
GL
ISH
FR
AN
ÇAI
S
DEU
TS
CH
E
ES
PA
Ñ
OL
IT
AL
IA
N
O
The top of the Carbon has a slot designed to accommodate an
iPad. To securely fit your iPad, we have included two rubber
shoe adaptors. The adaptors are stored in the bottom of the
Carbon 49.
Insert the rubber shoes into the left and right corners of the
iPad holder (as shown in illustration). Then, slide your iPad into
the rubber shoes. Plug an Apple Camera Adaptor to the iPad,
and connect the iPad to the keyboard via the included USB
cable.
Quick Start
1. Connect the Carbon 49 to your computer or iPad using the supplied USB
cable. The unit will receive power and transmit MIDI data via the USB
connection. Slide the POWER switch to the left to turn on the keyboard.
Note: To connect directly to an iPad, you will need to use the Apple iPad
Camera Connection Kit (not included).
2. Launch your DAW or virtual instrument software, and set the Carbon 49 as
the MIDI Input device.
3. To use the Carbon 49 with an external MIDI device (such as a sound module),
connect a 5-pin MIDI cable to the MIDI OUT on the rear of the Carbon 49,
and to the MIDI IN of the external device.
On
Off
3
4
5
6
7
8 9
10
1
2
3
4
1
2
Using an iPad
On
Off
3
4
5
6
7
8 9
10
1
2
3
4
1
2