Samson Carbon 49 USB/MIDI Keyboard Controller - Manual (Page 13)

13
Carbon 49 · USB/MIDI Keyboard Controller
EN
GL
ISH
FR
AN
ÇAI
S
DEU
TS
CH
E
ES
PA
Ñ
OL
IT
AL
IA
N
O
VOLUME Fader
The VOLUME fader sends MIDI information to control the performance of the
device that is connected to the keyboard. The factory setting is channel volume,
but can be assigned to another parameter in Edit Mode. Refer to the section
Edit Mode (p.14) for details.
DATA Knob
The DATA knob sends MIDI information to control the performance of the
device that is connected to the keyboard. The factory setting is pan control, but
can be assigned to another parameter in Edit Mode. Refer to the section Edit
Mode (p.14) for details.
PITCH BEND Wheel
The PITCH BEND wheel is used to bend notes played on the keyboard by
raising or lowering the pitch. The response and range of this controller is based
on the patch or sound source that is being controlled. The pitch bend wheel is
spring-mounted and will return to the center position when it is released.
SUSTAIN Pedal Input
You can connect a momentary footswitch or damper pedal to the rear panel
SUSTAIN Pedal input. The default setting for the pedal input is sustain
(CC #64). You can assign another function to the pedal input in Edit Mode.
Refer to the section Edit Mode (p.14) for details.
When the keyboard is powered on, it will detect the polarity of a connected
pedal. To reverse the pedal’s polarity, press the pedal when powering on the
keyboard.
Basic Operation