Vizio M-Series Quantum Q7-J01 58" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 18)

18
3
Adjusting the Color Tuner Settings
The Color Tuner settings allow you to adjust the color management system, 2 point
white balance, 11 point white balance, turn color channels off for testing, and display
SMPTE, flat, ramp, and uniformity analyzer test patterns.
To access the color tuner table:
Menu > Picture > Color Calibration > Color Tuner
To turn color channels off and on:
1 . Use the
Arrow buttons on the remote to highlight Red, Green, or Blue .
2 . Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3 . Only two color channels can be turned off at the same time.
To show or hide the SMPTE Test Pattern:
Menu > Picture > Color Calibration > Color Tuner > SMPTE Test Pattern
1 . Use the Arrow buttons on the remote to highlight Off . Use the Left/Right
Arrow buttons to select On to show the SMPTE Pattern .
—or—
2 . To hide the SMPTE Test Pattern, use the Left/Right Arrow buttons to
select Off .
SMPT Test Pattern
Off
To adjust the color management system/2 point white balance settings:
1 . Use the
Arrow buttons on the remote to highlight the Hue, Saturation,
Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button .
2 . Use the Left/Right Arrow buttons to adjust the value. When you are finished
press the OK button to save the setting .
To adjust the 11 Point White Balance settings:
1 . From the Color Tuner table, use the Arrow buttons to highlight the top bar and
then press the Left/Right Arrow buttons until the 11 POINT WHITE BALANCE
menu is displayed .
2 . Use the Arrow buttons on the remote to highlight the Gain and Color values
you wish to adjust . Press the OK button and use the Left/Right Arrow buttons
to adjust the value. When you are finished, press the OK button to save the
setting .
11 Point White Balance
Gain Red Green Blue
5% 0 0 0
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
Offset 0 0 0
Gain 0 0 0
WARNING: The Color Tuner, 11 Point White Balance, and test
patterns allow technicians to manually calibrate the TV . Calibration
requires specialized training, an input with precisely set colors, and
a specialized light meter .
TIP: Any changes made affect the color temperature setting. Select
the preferred color temperature setting first. See
Adjusting the
Color Temperature on page 16.