Vizio M-Series Quantum Q7-J01 58" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 37)

37
4 Playing USB Media
Preparing Your USB Drive to Play USB Media
To display USB media, you must first save your videos onto a USB flash drive:
• The USB flash drive must be formatted as FAT32.
• Files on the USB flash drive must end in a supported file extension ( .mp3, .jpg,
etc) .
• The player is not designed to play media from external hard drives, MP3 players,
cameras, or smartphones .
Displaying USB Media
To display your USB media:
1 . Connect your USB flash drive to the USB port on the side of the TV.
2 . The TV will recognize the USB . Use the Arrow Keys on the remote to select the
content you want to play .
—or—
3 . Select USB from the bottom streaming icons on the SmartCast Home SM page .
Removing the USB Drive from the TV
To safely remove your USB flash drive from the TV:
1 . Turn the TV off .
2 . Disconnect your USB flash drive from the USB port on the side of the TV.
The USB Media Player allows you to connect a USB flash drive to your TV and play
music, video, or photos .
Note: The image shown here is for illustrative purposes only and may be subject to change .
The actual number of ports and their locations may vary, depending on the model .
WARNING: Do not remove the USB flash drive while the TV is on.
Doing so may damage the drive .
TIP: You can display your photos in Fullscreen . Select the photo,
press
OK, then highlight Fullscreen and press OK .