Vizio M-Series Quantum Q7-J01 58" Class HDR 4K UHD Smart Quantum Dot LED TV - Manual (Page 20)

20
3
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
Menu > Audio > OK
Use the Arrow buttons to highlight the setting you wish to adjust, then press
Left/Right Arrow buttons to change the setting:
• Speakers — Turn the built-in speakers On
or Off.
• Volume Control Display — Turn the
on-screen volume display slider On or Off.
• Surround Sound — Surround sound uses
DTS TruSurround™ to deliver an immersive
surround sound experience from the TV’s
internal speakers . TruSurround completes
the entertainment experience by providing
deep, rich bass, crisp details, and clear,
intelligible dialog. Select On or Off.
• Volume Leveling — Volume leveling uses
DTS TruVolume™ to maintain consistent
volume levels during transitions between
program content, AV formats, and input
sources. Select On or Off. In a few cases, volume leveling may artificially suppress
volume increases, making it difficult to hear dialog or flattening sudden noises.
If this occurs, turn volume leveling off.
• Balance — Adjusts the loudness of the audio output from the left and
right speakers .
• Lip Sync — Adjusts the synchronization between the display image and the
accompanying audio track .
• Digital Audio Out — Changes the type of processing for digital audio out and
HDMI ARC output when connected to a home theater audio system . Select Auto,
PCM, Dolby D or Bitstream .
- To hear talk back when Talk Back function is enabled, digital audio out must
be set to PCM .
• Analog Audio Out — Sets the volume control properties for the RCA connector
when connected to a home theater audio system . Select Variable if you are
controlling the volume with the TV’s volume controls, or select Fixed if an
external audio device (sound bar or AV receiver) will control the volume .
Audio
Speakers
Volume Control Display
Surround Sound
Volume Leveling
Balance
Lip Sync
Digital Auto Out
Analog Audio
Auto
On
On
On
Auto
Out Fixed
TIP: You must select Bitstream for audio with more than two
channels (e .g ., 3 .0, 5 .0, or 5 .1) .
TIP: When the TV speakers are set to On, DTS signals cannot be
passed through digital audio outputs .