Firmware upgrade – Moza Slypod User Manual
Page 11
Advertising
9
Firmware Upgrade
Updating the firmware of Slypod should be done in the charging state. When in charging
state, turn on the device, connect it to the App, enter the operation interface and start the
firmware upgrade. The device must be restarted after the firmware upgrade succeeds. If
the upgrade fails, the process needs to be repeated until the upgrade succeeds.
● Setting-Indicator Light
Enter the operation interface, select Setting-Indicator Light, up to 5 kinds of indicator
light colors can be set based on personal preference.
Click to control the camera
Click to start the
Gradient Step
Time-lapse
Advertising