Moza Slypod - Manual (Page 5)

3
Arca-Swiss Quick Release
Mounting the handle
Align the 1/4’’ screw hole on the handle with the 1/4’’ screw on the bottom of the
main body, turn the handle anticlockwise to tighten it.
Turn the handle clockwise to detach the handle from the main body.
Mounting
Mounting the pan-tilt head
Push the quick mounting port into the groove at the top of the pole until fully fit.
Tighten the knob 3 clockwise to secure the head onto the pole;
Turn counter-clockwise to loosen the knob 3, then turn the knob 4
counter-clockwise to detach the head from the pole. After the Pan & Tilt head is
detached, reset the quick release knob.
(Mounting the adaptor) The same method as mounting the pan-tilt head.
Arca-Swiss quick release on the main body has a 1/4” screw hole and a 3/8”
screw hole to meet various extension needs. When the Slypod is horizontally
mounted on a tripod via the Arca-Swiss quick release, the Slypod can be
used as a motorized slider.
3/8” Screw Hole
1/4” Screw Hole
4
4