Yamaha YH-E700B Wireless Noise-Cancelling Over-Ear Bluetooth Headphones (Black) - Manual (Page 21)

Connecting to a Device Already Paired
Here’s how to connect to a Bluetooth device to which this product has already been paired.
1
Activate Bluetooth on the Bluetooth device.
2
Turn this product on.
The product automatically connects to the last Bluetooth device to which it was connected.
Once connected, the indicators light up as shown below.
If the connection cannot be automatically made, this product enters pairing standby mode.
Try connecting to this product from the Bluetooth device instead.
R
Blue
Lights up for 1 sec
Blue
Flashing
Blue
Lights up for 5 sec
3 sec
Once connected, you will hear the “Connected” audio message on this product.
Pairing is now complete.
NOTE
This product does not support multi-point connectivity (connection to multiple devices at the same time).
Related links
( “Pairing for the First Time” (p.15)
( “Pairing with a Different Device” (p.19)
21
Bluetooth® Connectivity > Connecting to a Device Already Paired